Control the temperature in your grow room with the reliable fan controller from GSE
- Temperature adjustable between 20 and 30°
- Minimum speed selectable
- For fans up to 1100 watts
- Higher yields through a better climate
When you are growing indoors, exhaust air and indoor climate are always an issue. In order for your plants to develop perfectly and for you to achieve maximum yields, it is important to keep the room temperature in the ideal range. At the same time, sufficient air flow prevents the humidity from increasing too much.
Separate control of temperature and minimum speed
The GSE temperature and speed controller 5A is equipped with two independent controllers for temperature and minimum speed. You can set the desired temperature between 20° and 30°, the controller operates with a hysteresis of 2°. This means that the fan does not have to constantly change its output, but only when a deviation of 2° from the desired temperature is measured. It is also very useful that you can set a minimum speed. This way, the interior of the grow box is always supplied with sufficient fresh air and there is always a slight negative pressure in the box. In this way, unwanted odours only escape to the outside via the activated carbon filter or the exhaust air hoses.
Long sensor cable for exact measurements
Since the temperature and speed controller has a sensor with a 1.9 m long cable, it can be easily mounted outside the grow box or grow room. You can then mount the temperature sensor in an ideal position at the height of the plants. The device is plug & play and immediately ready for use.
Technical details:
- Control power: max. 1100 watts
- Voltage: 230V / 50Hz
- Temperature accuracy: 0.5 degrees (between -10° and 85°)
- Control range: 20°-30°
- Measuring range: -55° - 125°
- Minimum speed: 20 - 100% / off
- Dimensions: 75 x 110 x 90 mm (WxHxD)
Boulevard "Bansko Shose"
Southern Industrial Zone (Südliche Industriezone)
Sliven, Bulgarien,
[email protected]
https://g-systems.eu/de_DE/contactus
There are no reviews yet.