SANlight EVO 3-60 1.5, 200W

SANlight EVO 3-60 1.5 200W

• Top efficiency of >3 µmol/J
• ideal for areas of 60 x 60 cm
• Quality LEDs with secondary optics
• dimmable and very flexible in use

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4, EVO 5 and EVO 6 models rank in the top class of LED grow lights and are currently unrivalled on the market.

Ideal for grow boxes with 60 x 60 cm

SANlight has taken extra care with the new EVO series to ensure that every grower has a sufficient choice of different wattages and module lengths. With three different lengths per model variant, there are many possible applications in combination with the use of several modules. The SANlight EVO 3-60 1.5 is particularly suitable for a square cultivation area of 60 x 60 cm.

Broadband light spectrum and high homogeneity

In the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! This allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO3-60 1.5 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time to come.

Quality LEDs, clever mounting options and dimmability

SANlight has also spared nothing in terms of LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight states that the 90 % light output (LM90) is 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space at the top. You can mount the elongated modules on the side next to the ventilation system. By angling the lamp, perfect illumination is still achieved. Whether small grow tent or professional cultivation - every grower can benefit from this. Of course, you can also dim the lamps of the EVO series. The optionally available dimmers (magnetic or Bluetooth) work contactless and are therefore wear-free and completely protected from water and high humidity. The dimming function allows you to easily adapt your new EVO 3-60 1.5 to the development phase of your plants. Since young plants in particular tolerate much less light than older ones and not as much light is needed during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 3. Dimmed, the efficiency is fully maintained and you even save a lot of electricity costs.

Scope of delivery:

• 1x SANlight EVO 3-60 1.5

Note: Connecting cables and dimmers etc. are not included and can be ordered separately in the shop. The cables of the Q series Gen2 can also be used for the EVO series.

Technical details:

• Power consumption: 200 watts
• Power factor: > 0.95
• Input voltage: 100 - 240 V
• Length: 468 mm
• Width: 291 mm
• Height 112 mm
• Photon flux density: 545 µmol/s
• Efficiency: 3 µmol/y
• Emission wavelength: 400 - 780 nm
• Weight: 3.5 kg
• Protection class: IP65
• max. rel. humidity: 99 %
• LM90: > 90,000 h

More on the subject of Indoor Growing:

Grow tents
LED grow lights
Extractor fan kits
Grow nutrients

SANlight EVO 1.5 Serie Data Sheet

SANlight EVO 1.5 Serie Data Sheet

SANlight EVO 1.5 Series Operating Instructions

SANlight EVO 1.5 Series Operating Instructions