SANlight EVO 4-100 1.5 265W
- Two EVO 4-100 1.5 for 100 x 100 cm in Pro setup
- 725 µmol/s at 265 watts - extreme light output
- Top efficiency of >3 µmol/J
- Dimmable, also via Bluetooth
With the new EVO series, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.
For maximum lighting intensity on 100 x 100 cm
For growers who have sufficient experience with the use of extreme amounts of light and who may use additional CO2 in the flowering phase, two EVO 4-100 1.5 per square metre of cultivation area offer the possibility of pushing the growth capacity of light-hungry plants to the limits. For the vegetative phase, dimmers should definitely be used with this set-up.
Broadband light spectrum and high homogeneity
During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 4-100 1.5 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics can be easily cleaned and thus guarantee flawless operation with high light output for a long time.
Quality LEDs, clever mounting options and dimmability
SANlight has also spared nothing in terms of LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight states that the 90 % light output (LM90) is 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space at the top. You can mount the elongated modules on the side next to the ventilation system. By angling the lamp, perfect illumination is still achieved. Whether in the home grow tent or professional cultivation - every grower can benefit from this. Of course, you can also dim the lamps of the EVO series. The optionally available dimmers (magnetic or Bluetooth) work contactless and are therefore wear-free and completely protected from water and high humidity. With the dimming function, you can easily adapt your new EVO 4-100 1.5 to the development phase of your plants. Since young plants in particular tolerate much less light than older ones and not as much light is needed during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 4. Dimmed, the efficiency is fully maintained and you even save a lot on electricity costs.
Scope of delivery:
- 1x SANlight EVO 4-100 1.5
Note: Connecting cables and dimmers etc. are not included and can be ordered separately in the shop. You can also use the cables of the Q Gen2 series for the EVO series.
Technical details:
- Power consumption: 265 watts
- Power factor: > 0.95
- Input voltage: 100 - 240 V
- Length: 818 mm
- Width: 291 mm
- Height: 112 mm
- Photon flux density: 725 µmol/s
- Efficiency: 3 µmol/y
- Emission wavelength: 400 - 780 nm
- Weight: 4.8 kg
- Protection class: IP65
- max. rel. humidity: 99 %
- LM90: > 90,000 h
More on the subject of Indoor Growing:
Grow tents
LED grow lights
Extractor fan kits
Grow nutrients
SANlight EVO 1.5 Serie Data Sheet
SANlight EVO 1.5 Series Operating Instructions
for growbox area: | 100x100cm |
Montafonerstrasse 14
Schruns, Österreich, 6780
[email protected]
https://www.sanlight.com/kontakt#kontakt-formular
There are no reviews yet.