Sanlight LED Set 2x EVO 3-80 1.5

  • perfectly suitable for 2 surfaces of 80 x 80 cm
  • 2x 545 µmol/s - light output full
  • Set with H-distributor and cables
782,91 €
10%
incl. 19% VAT , plus shipping costs
Old price: 869,90 €
  • Available immediately
  • Delivery time: 2 - 5 Workdays (DE - int. shipments may differ)


Description

Sanlight LED Set 2x EVO 3-80 1.5

  • perfectly suitable for 2 surfaces of 80 x 80 cm
  • 2x 545 µmol/s - light output full
  • Set with H-distributor and cables

If you want to perfectly illuminate two grow boxes with 80 x 80 cm or, for example, an open growing area of 80 x 160 cm, this set is just right for you. Besides the two EVO 3-80 1.5 by SANlight, it contains the necessary mains and extension cables, an H-distributor as well as two cable ratchet sets by GrowPRO and a timer. Each of your new EVOs has an output of 545 µmol/s, with a power consumption of only 200 watts - a value that is second to none! So you can look forward to strong growing plants and rich harvests in your future indoor grows.

Broadband light spectrum and high homogeneity

During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 3-80 1.5 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time.

Quality LEDs, clever mounting options and dimmability

SANlight has also spared nothing in terms of LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight states that the 90 % light output (LM90) is 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space upwards. You can mount the elongated modules on the side next to the ventilation system. By angling the lamp, perfect illumination is still achieved. Whether small grow tent or professional cultivation - every grower can benefit from this. Of course, you can also dim the lamps of the EVO series. The optionally available dimmers (magnetic or Bluetooth) work contactless and are therefore wear-free and completely protected from water and high humidity. The dimming function allows you to easily adapt your new EVO 3 to the development phase of your plants. Since young plants in particular tolerate much less light than older ones and not as much light is needed during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 3. Dimmed, the efficiency is fully maintained and you save quite a bit on electricity costs.

Scope of delivery:

  • 2x EVO 3-80 1.5
  • 1x H-distributor
  • 1x Mechanical timer
  • 1x Mains connection cable EVO & Q series with 90° angle, 2.1 m
  • 2x extension cable Gen2, 1 m (from H-distributor to lamps)
  • 2x GrowPRO ratchet set, steplessly adjustable

Technical details:

  • Power input: 200 watts
  • Power factor: > 0.95
  • Input voltage: 100 - 240 V
  • Length: 643 mm
  • Width: 291 mm
  • Height: 112 mm
  • Photon flux density: 545 µmol/s
  • Efficiency: 3 µmol/y
  • Emission wavelength: 400 - 780 nm
  • Weight: 3.8 kg
  • Protection class: IP65
  • max. rel. humidity: 99 %
  • LM90: > 90,000 h

More on the subject of Indoor Growing:

Grow tents
LED grow lights
Extractor fan kits
Grow nutrients

Reviews
Write the first review for this item and help others make a purchase decision!

There are no reviews yet.

This item consists of
Others also bought: