Sanlight LED Set 2x EVO 4-80 1.5

  • massive light output of 2 x 725 µmol/s
  • Pro set-up for two 80 x 80 cm surfaces
  • Quality LEDs with secondary optics
980,91 €
10%
incl. 19% VAT , plus shipping costs
Old price: 1.089,90 €
  • Available immediately
  • Delivery time: 2 - 5 Workdays (DE - int. shipments may differ)


Description

Sanlight LED Set 2x EVO 4-80 1.5

  • massive light output of 2 x 725 µmol/s
  • Pro set-up for two 80 x 80 cm surfaces
  • Quality LEDs with secondary optics

For growers with sufficient experience with high light levels, two EVO 4-80 1.5s offer the possibility to get the maximum growth out of their plants in two grow boxes of 80 x 80 cm or a growing area of approximately 80 x 160 cm. With an output of 725 µmol/s, however, you should definitely use a dimmer for young plants and also during the growth phase in order not to damage the plants. Connection cables for the lamps, an H-distributor and an angled mains cable are already included in the set. In addition, there is a mechanical timer and two GrowPRO ratchet sets for the suspension.

Broadband light spectrum and high homogeneity

In the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 4-80 1.5 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics can be easily cleaned and thus guarantee flawless operation with high light output for a long time.

Quality LEDs, clever mounting options and dimmability

SANlight has also spared nothing in terms of LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight states that the 90 % light output (LM90) is 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space at the top. You can mount the elongated modules on the side next to the ventilation system. By angling the lamp, perfect illumination is still achieved. Whether in the home grow tent or professional cultivation - every grower can benefit from this. Of course, you can also dim the lamps of the EVO series. The optionally available dimmers (magnetic or Bluetooth) work contactless and are therefore wear-free and completely protected from water and high humidity. The dimming function allows you to easily adapt your new EVO 4-80 1.5 to the development phase of your plants. Since young plants in particular tolerate much less light than older ones and not as much light is needed during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 4. Dimmed, the efficiency is fully maintained and you save quite a bit on electricity costs.

Scope of delivery:

  • 2x EVO 4-80 1.5
  • 1x H-distributor
  • 1x Omnirex mechanical timer by Legrand
  • 1x Mains connection cable EVO & Q series with 90° angle, 2.1 m
  • 2x extension cable Gen2, 1 m (from H-distributor to lamps)
  • 2x GrowPRO ratchet set, infinitely adjustable

Technical details:

  • Power input: 265 watts
  • Power factor: > 0.95
  • Input voltage: 100 - 240 V
  • Length: 643 mm
  • Width: 291 mm
  • Height: 112 mm
  • Photon flux density: 725 µmol/s
  • Efficiency: 3 µmol/y
  • Emission wavelength: 400 - 780 nm
  • Weight: 4.5 kg
  • Protection class: IP65
  • max. rel. humidity: 99 %
  • LM90: > 90,000 h

More on the subject of Indoor Growing:

Grow tents
LED grow lights
Extractor fan kits
Grow nutrients

Reviews
Write the first review for this item and help others make a purchase decision!

There are no reviews yet.

This item consists of
Others also bought: